Frequency:CDMA850: Uplink: 824-849MHz Downlink: 869-894MHz
PCS1900: Uplink:1850-1910MHz Downlink: 1930-1990MHz
Power:≥ 27dBm
Gain:Uplink≧ 65dB Downlink ≧ 70dB
Max Output Power:+23dBm/±3DBM Total power
Impedance:50Ω
Seclusion:<70dB
Connector Type: N-F
Compact Design:Indoor Use
Operating Temperature:-10℃-60℃
Power Supply:DC12V 2A
Coverage Area: 1000m2
Dimension:32cm×22cm×6cm
Weight : 1.5kg

Dimension:35cm×28cm×15cm
Package weight:2.7kg

Package:
Amplifier host: 1 piece
Outdoor antenna: 1 piece
Indoor antenna: 1 piece
Power supply: 1 piece
Cable: 10m outdoor

Installation Method:
1. Find the strongest direction and position of the received signal for mobiles at the top or the periphery of the building, as
the location for installing the outdoor antenna, pay attention that the location should be paid to lightning protection. The
installation height should not be higher than the lightning protection network of the building. If it is higher than the
lightning protection network. If it is necessary, install a lightning rod 1 meter above the outdoor antenna and ground it
well.
2. After selecting the appropriate location, fix the outdoor antenna to the wall or bracket.
3. Select an appropriate location in the relevant indoor location (close to the power supply and the outdoor antenna end, rain
-proof, sunshine-proof and ventilation is best location) install indoor straight machine, and fixed to the wall or bracket.
4. Lead the outdoor antenna to the 'BTS' (outdoor) interface, and the connection between the outdoor antenna and the amplifier
is completed.
5. After defining the indoor antenna installation position, fix the antenna.
6. The indoor antenna connected to the amplifier, one port connecting to the indoor antenna interface, and the other port
connecting to the repeater's 'MOBILE' (indoor) port.